GTA Smart Sensor Faucet Infrared Sensor Automatic Water Saving Faucet Anti-Overflow Kitchen Bathroom Inductive

Product Weight: 95g Product Size; 53×52.5×34.3mm
Standby power consumption: 0.2mW
Working water pressure: 0.05-0.8MPa
Temperature working water; ≤75°C
Detection range: side detection 0-5cm / bottom detection 0-10cm
Packing list: induction water saving device *1, hex key *1, sealing ring *3, adapter *1, manual
To prevent accidental contact
Side sensor window
No debris within 10 cm distance< br/> Bottom sensor window
The height from the bottom of the pool should not be less than 15cm
Instant mode
Wash your face and wash the new fun sensor bottom to meet short-term water demand. When the sensor enters the lower detection area (with a distance limited to 10 cm), the water starts. When the sensor is missing, the water stops. If the sensor stays in the lower sensing area, the water will stop automatically after more than 20 seconds of water discharge, which is necessary for daily cleaning.
Water accumulation mode
The side and side sensors of the pans and the pans meet the requirements of using water accumulation. When the sensor enters the side sensing area (with a distance limited to 5cm), the water begins to flow. The water drain time lasts 3 minutes, and the water remains even if the sensory object goes away. If the sensor enters the side sensing area again during the water draining process, the water may be cut off at any time, a good choice for water storage. water.< br/>
Package Contents: 1 x Water Saving Device, 1 x Wrench, 3 x Sealing Rings, 6 x Mounting Adapters.