LetsGO Blackout Window Film Electrostatic Film Window Film Stripe Pattern Window Film Non Adhesive Window Film Anti-uv For Kitchen Home Office Meeting Room D

Product Static Window Film Self-Adhesive Window Film Blackout Film Frosted Privacy Window Film Kitchen Office Why Window Film? For Window Hopes To Create A Space That Sets You And Your Family Apart Through The Quality Of Your Home. And Value. To Provide You With A Variety Window Films Is Glueless Design, Installation Is Simple, So You Can Adapt According To Your Preference, Different Patterns And Different Privacy Effects, For Your Convenience. Lay Eggs Your Different Needs And Stimulate Your Creativity, Turn Your Windows Into A Work Of Art
Product FeaturesProtect Your Privacy The Window Film Has A Striped Pattern, Matte Texture, Simple And Beautiful, Allowing The Light To Switch To; Across At The Same Time Can Block Curiosity. Of People, Let You Enjoy Their Own Space.Non-Glue Design The Blackout Window Film Relies On Static Adsorption, Do Not Need Glue, Can Be Firmly Attached ;S To Window Glass, Residue-Free Removal, Reusable.Uv Blocking This Privacy Window Film Blocks Most Uva And Uvb Rays, Protecting The Skin From Family While Reducing Furniture Aging And Fading.Read MoreMatching LocationShopBedroomKitchen TableRead MoreInstallation Procedures: ToolsTape, Cutter, Ruler, Sprayer And Soapy Water. 1. Remove The Film Backing And Prevent The Window Film From Falling Off. 2. Measure The Privacy Window Film, Cut The Film With A Cutter, Try To Avoid Scratching Sharp Items With A Knife. The Surface Of The Window Film, Leaving Scratches, Affecting The Aesthetics. 3.After Careful Cleaning Windows With A Damp Cloth, That The Surface Is Clean. 4. Don&Rsquo;T Forget To Use The Tape To Separate The Electrostatic Window Film From Its Transparent Protection Then For The Installation, Otherwise, The Window Film Will Not Stick To It. The Window. Tip: Put A Tape On Each Side. And Remove The Tape.(You Can Peel Off The Protective Film Using The Little Label We Have Or You Can Make Your Own Little Label With Tape).(Key Points) 5. Apply The Blackout Window Film To The Flat On The Clean Floor, Side Down. Adhesive Side Up. Spray The Window Film And Glass Generously With Water, Preferably Soapy Water. (Key Points) 6. Place The Privacy Window Film On The Glass As Precisely As Possible. 7. Once Placed, Scrape From The Center To The Edges With A Squeegee To Remove The Bubbles As Much As Possible And Wipe As You Go. Measure. 8.And Finish Trimming The Excess With A Cutter Around The Edges Of The Windows.Note: 1.Please Follow The Instruction Manual , And Respect The Method Of Installation. 2.Recommend To Pay Attention To The Measurements Of Privacy Window Film, Especially For The Width. 3. Privacy Window Film Is Only Suitable For For Flat, Clean And Smooth Surfaces. 4. Be Sure To Tear Off The Transparent Protective Film Of Window Electrostatic Film, Otherwise There Is No Adhesion. 5.Where To Water? Melts Window Film And Window Film, Soapy Water Is Recommended. 6.In Winter, The Adhesion Of Privacy Window Film Decreases Due To Low Temperature, So We Recommend You To Soak It In Warm Water Or Use The Hot Wind Of Hair Dryer To Soften It Before Installing It According To The Procedure. 7.Do Not Use A Hard Object As A Squeegee Because It Will Damage The Window Film. Package Includes: 1X Zindoo Window Films And 1 X Installation InstructionsRead MoreRead More