- Uses 75% less water
- Maintains pressure, heat & coverage
- Two low flush modes
Altered: Shower is a Swedish-developed showerhead that uses 75% less water than conventional showerheads. The low-flow showerhead provides a great shower experience with good pressure, coverage and heat without using more energy and water than needed.
Maintained pressure
The Altered shower nozzle works in contrast to other water-saving shower nozzles. Instead of throttling the water pressure, the showerhead increases the speed of the water and can thus maintain the same pressure and rinsing performance, even if the amount of water used is significantly less.
Good distribution of water
The dome in the showerhead causes the water to rotate and break up into thousands of large water droplets. The large droplets get you really wet and also spread the water in an irregular pattern for good distribution over your body.
Use the same heat setting
The high speed of the water droplets means that the water does not have time to cool down before it hits the skin. So you don’t have to turn up the heat on the thermostat just because you use a different nozzle.
Dual flow technology
The shower nozzle has a unique dual flow technology where you can choose between two low flush modes; Dome and Monsoon.
Dome (cupola), 3.5 litres per minute
Dome mode is the most water-efficient mode on the tap, using only 3.5 litres of water per minute. This mode is perfect for showering the whole body and rinsing off shower soap.
Monsoon, 6.5 litres per minute
Monsoon mode uses more water, 6.5 litres per minute, and is effective for rinsing shampoo and conditioner out of your hair.
Easy to install
Unscrew your existing showerhead and screw on the Altered:Shower showerhead.
swedish innovation
The Altered: Shower nozzle is developed by the award-winning Swedish company Altered, founded by Professor Kaj Mickos, Johan Nihlén and Mikael Abbhagen in 2016. Altered is also behind the water-saving nozzle for the tap, Altered: Nozzle.
Good to know
The shower nozzle has a flow regulator that ensures you have the right water flow regardless of water pressure. This means that no matter how much you open the tap, the nozzle regulates the amount of water for you.
Technical requirements
For the showerhead to work optimally, make sure that the tap is open properly and that you do not already have a mixer installed that reduces the water flow. If the water pressure is too low, the nozzle will automatically return to the Dome mode.
There are also some other parameters you should take into account.-Recommended water pressure is 2 bar. The shower must have a water pressure of at least 1.5 bar.-The water flow rate should normally be at least 9-10 litres of water per minute (without a nozzle connected).-The shower hose must have a 1/2″ connection (female), which is the standard size in the EU and USA
Specifications
Material: stainless steel, aluminium
Reviews
There are no reviews yet.